Included inside the compact 24 pin package is fully temperature compensated, wide range, voltage controlled oscillator providing sub-oscillator, triangle, saw-tooth, and pulse waveforms; a voltage controlled mixer for adjusting the balance between the internally generated VCO waveforms and any external signal; a dedicated four-pole low-pass voltage controlled filter with voltage controlled resonance; a modulation VCA for modulating the filter frequency by the triangle waveform output of the VCO; and a final VCA for allowing the output to be enveloped. Envelope control for both the VCF and final VCA may be provided by either a hardware envelope generator such as the AS3310 or through software.
All eight control inputs are provided with internal very high input impedance, low bias current buffers. Thus interface to a microprocessor system may be accomplished simply with a single DAC, 4051-type CMOS multiplexer, and 8 hold capacitors.
Features
Product Replacements
This device is electrically compatible with original chips used in the following products. Note however that this device has 4 more pins than the original and thus cannot be used directly as a replacement. *
Manufacturer | Product | Quantity |
---|---|---|
Akai | AX60 | 6 |
Akai | AX73 | 6 |
Akai | VX90 | 6 |
Doepfer | A-111-5 Mini Synthesizer Voice | 1 |
Doepfer | Dark Energy, Monophonic Synthesizer (orig model only) | 1 |
Sequential Circuits / Dave Smith Instruments | Six-Trax | 6 |
Sequential Circuits / Dave Smith Instruments | Multi-Trak | 6 |
Sequential Circuits / Dave Smith Instruments | MAX | 6 |
Sequential Circuits / Dave Smith Instruments | Split8 | 8 |
Simmons Drums | SDS9/SDS1000 | 3 |
Simmons Drums | SDS200 | 2 |
Simmons Drums | SDS400/SDS800 | 4 |
Package: DIL-24