Cabintech CT3680V1-DEV-A CT3680 V1 Development/Breakout Board
CT3680V1-DEV-A delay module 3680 bbd development breakout
Cabintech CT3680V1-DEV-A CT3680 V1 Development/Breakout Board (Assembled PCB)
Loading product data...
Loading product data...
Loading product data...
This item is available as
- a bare PCB
- a PCB with only the 40-pin SMT connector installed
- a fully populated and tested board, including CT3680 V1 delay module
Note that only the fully assembled board includes a CT3680 V1 delay module.
The CT3680 V1 development board provides a platform for prototyping and development of CT3680 V1 based effects. The
board supports all features of the CT3680 V1 with switches, potentiometers, and 2.5mm jacks for all inputs and
outputs of the CT3680. This allows
for operation of all features of the device with no external circuitry. All on-board controls can be disabled and
made available on header pins for off-board operation of program selection, option settings,
control voltages, and multi-module linking.
V1 Development Board Features
- 6 potentiometers for CV controls
- 4 program select switches
- 5 option select switches
- Power connector jack
- Power on/off switch and LED
- 8 mono (TS) 3.5mm audio input/output jacks
- 1 stereo (TRS) 2.5mm audio output jack
- Header pins for all audio inputs and outputs
- 5V, 3.3V, and GND header pins
- Headers for upstream and downstream linked modules
- Switch for 1 or 2 channel linking
- 40 pin socket for CT3680 module
Four 2.5mm TS (mono) audio input jacks are provided for analog inputs, and
five audio output jacks for analog outputs (4 TS mono and 1 TRS combined stereo). Six on-board potentiometers provide
CV inputs to the module. 4 on-board switches are provided for program selection and 5 for option settings.
Easily accessible test points are provided for all 40 pins of the module, and dedicated header pins provide
easy scope probing of all analog inputs and outputs.
The board requires +5V DC from an external
source via a 5.5mm (center positive) power jack. An on board switch allows power down of the module without
disconnecting the external power.
The development board is available as a bare PCB, assembled with only the 40 pin SMT edge connector for
the module, or fully populated with all components, rubber feet and potentiometer knobs (colors may vary).
References
News: Facebook page.
Reviews: Trustpilot
Home
Semiconductors
Articles
CEfx Experimenters Series Modules
About Us
Contact Us
V 11.45