Cabintech CT3680V1-DEV-C CT3680 V1 Development/Breakout Board (w/Connector) (PCB)

 Loading product data...

This item is a bare PCB with (only) the 40-pin surface mount socket installed. Assembly consists of all through-hole components. Components and CT3680 V1 module are not included.

The CT3680 V1 development board provides a platform for prototyping and development of CT3680 V1 based effects. The board supports all features of the CT3680 V1 with switches, potentiometers, and 2.5mm jacks for all inputs and outputs of the CT3680. This allows for operation of all features of the device with no external circuitry. All on-board controls can be disabled and made available on header pins for off-board operation of program selection, option settings, control voltages, and multi-module linking.

V1 Development Board Features

• 6 potentiometers for CV controls
• 4 program select switches
• 5 option select switches
• Power connector jack
• Power on/off switch and LED
• 8 mono (TS) 3.5mm audio input/output jacks
• 1 stereo (TRS) 2.5mm audio output jack
• Header pins for all audio inputs and outputs
• 5V, 3.3V, and GND header pins
• Headers for upstream and downstream linked modules
• Switch for 1 or 2 channel linking
• 40 pin socket for CT3680 module

The board requires +5V DC from an external source via a 5.5mm (center positive) power jack. An on board switch allows power down of the module without disconnecting the external power.

The development board is available as a bare PCB, assembled with only the 40 pin SMT edge connector for the module, or fully populated with all components, rubber feet and potentiometer knobs (colors may vary).

See documentation below for component lists and assembly instructions.

References