Cabintech CT3680-DEV-B CT3680 Development/Breakout Board (Bare PCB)

 Loading product data...

This item is also available as a fully populated PCB with all components and CT3680 installed.

This PCB uses all through-hole components. The CT3680 module can be surface mounted or mounted using the CT3680 Through Hold Adapter. This is a bare PCB only and does not include any components or the CT3680 module.

See documentation below for component lists and assembly instructions.

The CT3680 development board provides a platform for prototyping and development of CT3680 based products. The board supports all features of the CT3680 with switches, potentiometers, and 2.5mm jacks for all inputs and outputs of the CT3680. This allows for operation of all features of the device with no external circuitry. All on-board controls can be disabled and made available on header pins for off-board operation of program selection, option settings, control voltages, and multi-module linking.

Development Board Features

• 6 potentiometers for CV controls
• 4 program select switches
• 5 option select switches
• Switches for sample rate, primary/secondary chaining, 1/2 channel linking, and system reset
• Power connector jack
• Power on/off switch and LED
• 8 mono (TS) 3.5mm audio input/output jacks
• 1 stereo (TRS) 2.5mm audio output jack
• Header pins for all audio inputs and outputs
• 5V, 3.3V, and GND header pins
• Headers for upstream and downstream linked modules
• 48 test points for all CT3680 module pins

The board requires +5V DC from an external source via a 5.5mm (center positive) power jack. An on board switch allows power down of the module without disconnecting the external power.

The development board is available as a bare PCB or fully populated with all components, rubber feet and potentiometer knobs (colors may vary).

References